| MAYER |
ZM 2000/1000 |
9776 |
Year: 1986, Section beam warper. Warper with many accessories. Please ask for detailed spec. sheet on this warper. |
AS IS |
Journal |
70¾" & 78" Felt |
220/380 |
| MAYER |
ZMZ 1800/1000 |
11459 |
Year: 1993, Electronic doff control, DC drive, expandable comb reed, foot brake, digital controls, Appalachian model 50 dual yarn inspector, Protechna Camscan 5201, oiler, motorized WA65 tension roller, 1080 end eyeboard. |
Cleaned & tested. |
4½" |
Yes. |
360/480 |
| MAYER |
DS 75/40 P |
11984 |
Year: 1996, Electronic doff control, DC drive, expandable comb reed, foot brake, digital controls, Appalachian model 50 dual yarn inspector, Protechna Camscan 5201, oiler, motorized WA65 tension roller, 1080 end eyeboard, 1080 KFD tensions, no creel. |
Cleaned & tested. |
4½" |
Yes. |
360/480 |
| MAYER |
DS 75/40 PW |
10008 |
Year: 1987, Electronic doff control, DC drive, expandable comb reed, foot brake, digital controls, Appalachian model 50 dual yarn inspector, Protechna Camscan 5201, oiler, motorized tension roller, 990 end eyeboard, 990 KFD tensions & creel. |
Cleaned & tested. |
4½" |
Yes. |
360/480 |
| MAYER |
DS 75/40 |
9744 |
Year: 1986, Electronic doff control, DC drive, expandable comb reed, foot brake, digital controls, Appalachian model 50 yarn inspector, Protechna Camscan 5201, oiler, motorized WA65 tension roller, 1080 end eyeboard, 1080 KFD tensions & creel. |
Cleaned & tested. |
4½" |
Yes. |
360/480 |
| MAYER |
DS 65/40 P |
11786 |
Year: 1994, Electronic doff control, DC drive, expandable comb reed, foot brake, digital controls, Appalachian model 50 yarn inspector, Protechna Camscan 5201, oiler, motorized WA65 tension roller, 1496 end eyeboard, 1496 KFD tensions & creel. |
Cleaned & tested. |
4½" |
Yes. |
360/480 |
| MAYER |
DS 65/40 P |
11620 |
Year: 1993, Electronic doff control, DC drive, expandable comb reed, foot brake, digital controls, Appalachian model 50 yarn inspector, Protechna Camscan 5201, oiler, motorized WA65 tension roller, 1364 end eyeboard, 1364 KFD tensions, no creel. |
Cleaned & tested. |
4½" |
Yes. |
360/480 |
| MAYER |
DSST 50/32 |
9135 |
Year: 1984, Draw warper with air entanglement, no creel |
AS IS |
6" |
No |
220/380 |
| MAYER |
DSST 50/32 |
9766 |
Draw warper head only, no drive control |
AS IS |
4½" |
No |
220/380 |
| MAYER |
DS 50/32 |
9926 |
Year: 1986. Warper includes a motorized tension roller, static eliminator, & 3 reeds. 11kW motor. |
RECOND |
6" |
No |
200/600 |
| MAYER |
HDS 65/32 |
8055 |
Year: 1979 |
AS IS |
6" |
|
|
| MAYER |
DS 65/50 |
5996 |
Year: 1973, with tension roller |
RECOND |
6" |
57 1/8" Felt |
220/380 |
| MAYER |
DS 65/40 P |
8524 |
Year: 1981 Cotton warper |
AS IS |
6" |
60½" Phenolic |
|
| MAYER |
DS 65/40 P |
8139 |
Year: 1979, with 2 Protechna Camscans |
AS IS |
6" |
60½" Phenolic |
|
| MAYER |
DS 50/30 PW |
7214 |
Year: 1976, 100% Reconditioned with motorized tension roller |
RECOND |
6" |
39 3/8" Phen |
380 |
| MAYER |
DS 50/30 |
6579 |
Year: 1974 |
AS IS |
6" |
N/A |
380 |
| MAYER |
DS 50/30 PW |
5077 |
Year: 1971, including tension roller |
Cleaned & Tested |
4½" |
18 3/16" Felt |
|
| MAYER |
DS 50/30 |
4283 |
Year: 1969, with Liba 740 end magazine creel 2 post tensions, eyeboard, tension roller, anti-static control, Lindly yarn inspector, & accumulator |
AS IS |
4½" |
No |
|
| MAYER |
DSC 50/21 P |
8376 |
Year: 1980, for tandem (2) 21" x 21" beams, with tension roller |
RECOND |
4½" |
2x18 3/8" Felt |
|
| MAYER |
DSC 50/21 OPW |
8569 |
Year: 1981, for tandem (2) 21" x 21" beams, with tension roller |
AS IS |
6" |
|
|
| MAYER |
DSC 50/21 OPW |
8358 |
Year: 1980, for tandem (2) 21" x 21" beams, with tension roller |
AS IS |
6" |
|
|
| MAYER |
DSN 50/30 OPW |
7219 |
Year: 1976, with tension roller |
AS IS |
6" |
No |
220/380/415/460/550 |
| MAYER |
DS 50/21 OPW |
7211 |
Year: 1976 |
AS IS |
6" |
|
|
| MAYER |
DS 50/21 OPW |
7231 |
Year: 1976, Perfect for spare parts |
JUNK |
n/a |
|
|
| MAYER |
DS 42/40 NC |
10639 |
Year: 1989, with motorized WA50 #1066 tension roller, GS50-8 #2921 accumulator. |
RECOND |
4½" |
No |
|
| MAYER |
DS 42/21 |
8958 |
Year: 1983, with new Siemens Drive, and tension roller with tac. & brakes |
RECOND |
6" |
No |
220 |
| MAYER |
FSSB 42/21 |
7850 |
Year: 1978, Warper for High Density Polyethylene, tandem (2) 21" x 21", with slitting, stretching, heat setting, and warping in continuous operation from foil to beams |
AS IS |
6" |
2x18¾" Felt |
220/440 |
| MAYER |
SM 42 |
2275 |
Year: 1965, for 21" x 42", with tension roller |
AS IS |
6" |
36" Felt |
|
| MAYER |
DS 25/30 OPW |
6423 |
Year: 1974 |
AS IS |
4½" |
No |
220/380 |
| MAYER |
DS 25/30 P |
6193 |
Year: 1973 |
RECOND |
4½" |
18 3/8" Felt |
220/380 |
| MAYER |
DSN 21/30 |
11544 |
Year: 1993, with tension roller, accumulator, eyeboard, oiler, & Warpstop 4050. |
AS IS |
6" |
No |
|
| MAYER |
DS 28/21 OPW |
6794 |
Year: 1974 |
AS IS |
6" |
No |
|
MAYER |
DSC 21 |
8756 |
Year: 1982, with deviation roller & new 6" beam chucks. |
RECOND |
6" |
18¾" Felt |
220/380 |
| MAYER |
DS 21 PW |
6240 |
Year: 1973 with tension roller & accumulator. |
AS IS |
4½" |
18" Felt |
220/440 |
| MAYER |
DS 21 PW |
5029 |
Year: 1971. |
RECOND |
|
18¼" Felt |
220 |
| MAYER |
DS 14 PW |
7439 |
Year: 1977 with press roller. |
RECOND |
4½" |
19¼" Felt |
400/440 |
| MAYER |
|
|
LYCRA CREEL, without warper, 1440 ends, year: 1986, Like New |
Like new |
|
|
|
| |
|
|
|
|
|
|
|
| LIBA |
TYPE 25M-1100 |
SM34007 |
Year: 1997, for 30" x 43" beams, with accumulator, oiler, Camscan, & 1200 end KFD creel. |
AS IS |
6" |
|
|
| LIBA |
TYPE 25M-1100 |
SM34008 |
Year: 1997, for 30" x 43" beams, with accumulator, oiler, Camscan, & 1200 end KFD creel. |
AS IS |
6" |
|
|
| LIBA |
TYPE 23A |
3426 |
Year: 1985, for 30" x 43" beams, runs up to 1000 yards per minute, with oiler, reed, eyeboard, & antistatic & 700 end Mayer push pin creel. |
AS IS |
4½" |
39¼" Felt |
|
| LIBA |
TYPE 24AW/100 |
Z-2861 |
Year: 1981, for 30" x 43" beams, with 1200 end creel. |
AS IS |
6" |
|
|
| LIBA |
TYPE 24AW/100 |
Z-2862 |
Year: 1981, for 30" x 43" beams, with 1200 end creel. |
AS IS |
6" |
|
|
| LIBA |
TYPE 23 |
2385 |
Year: 1969, with Liba 780 end magazine creel 2 post tensions, eyeboard, tension roller, anti-static control, AEG yarn inspector, & accumulator |
AS IS |
4½" |
470mm Phen |
|
| LIBA |
TYPE 23 |
3354 |
Year: 1980 with 680 end creel. |
Cleaned & Tested. |
6" |
|
|
| LIBA |
TYPE 23 |
3180 |
Year: 1973, Reconditioned, painted & test run in 2002. Also included: Tension Roller, Lindly Yarn Inspector, Oiler, Anti-static, Accumulator, and reconditioned 680 end creel with KFD tensions. Can run up to 30" flange beams. |
RECOND & TEST RUN |
6" |
No |
|
| LIBA |
TYPE 23 |
3082 |
Warper with press roller, accumulator, oiler, yearn inspector, & tension roller. Includes 528 end Liba magazine creel. |
Cleaned & Tested. |
4½" |
18 7/8" Felt |
|
| LIBA |
TYPE 23 |
3067 |
Warper with press roller, accumulator, oiler, yearn inspector, & tension roller. Includes 528 end Liba magazine creel. |
Cleaned & Tested. |
4½" |
18 7/8" Felt |
|
| LIBA |
TYPE 23 |
3187 |
With 800 end creel |
AS IS |
n/a |
470mm Felt |
|
| LIBA |
TYPE 23 |
3457 |
Year: 1987 |
AS IS |
4½" |
6¼" Felt |
|
| LIBA |
TYPE 21 |
2519 |
Year: 1973, tandem (2) 21" x 21" beams |
RECOND |
6" |
No |
220/380 |
| LIBA |
TYPE 19 |
2160 |
Reconditioned. |
RECOND |
70mm |
18 3/4" |
380V |
| LIBA |
TYPE 15 |
1530 |
For 14" x 14" beams |
RECOND |
70mm |
13" Felt |
220 |
| |
|
|
|
|
|
|
|
| COCKER |
YP |
043-52852-1-70 |
Section beam & Tricot beam setup, reconditioned by Gastex |
RECOND |
Journal & 4½" |
54" Rubber & 39 3/8" Phen |
220/440 |
| COCKER |
YP |
043-52336-1-69 |
Section beam setup, for up to size 40" x 54¼", cleaned & checked by Gastex |
RECOND |
Journal |
54" Rubber |
|
| COCKER |
149C |
1 MACHINE Warper # 16 |
Rebuilt by Gastex 1984/86, complete with Air Brakes and Appalachian Model 202 Yarn Inspector. Creels and auxiliary equipment are available. |
RECOND |
4½" |
39¼" Rubber |
220/440 |
| COCKER |
149C |
1 MACHINES Warper # 11 |
Rebuilt by Gastex 1984/86, complete with Air Brakes and Appalachian Model 202 Yarn Inspector. Creels and auxiliary equipment are available. Fully overhauled. |
RECOND |
4½" |
39¼" Rubber |
220/440 |
| COCKER |
149C |
2 MACHINES Warpers # 13 & 14 |
Rebuilt by Gastex 1984/86, complete with Air Brakes and Appalachian Model 202 Yarn Inspector. Creels and auxiliary equipment are available. |
RECOND |
4½" |
39¼" Rubber |
220/440 |
| COCKER |
MB 55 |
MO37606-2-64 |
1344 end creel/Yarn inspector |
RECOND |
4½" |
38 3/8" Phen |
220/440 |
| COCKER |
MB 55 |
055-53210-1-71 |
Rebuilt by Gastex, complete with Air Brakes, all belt driven, 15 HP Reliance drive. Speed: 1000 yrds/min |
AS IS |
|
YES |
220/240/550 |
| COCKER |
MPB |
MO54917-5-78 |
30HP DC motor & control by WER Industrial, all pneumatic brakes, will run up to 40" diameter beams. |
Cleaned, painted & tested. |
Journal |
54" Rubber |
230V 3 phase |
| COCKER |
MPB |
MO54248-2-74 |
30HP DC motor & control by WER Industrial, all electric brakes, will run up to 40" diameter beams. |
Cleaned, painted & tested. |
Journal |
54" Phenolic |
230V 3 phase |
| COCKER |
MPB |
|
30HP DC motor & control by WER Industrial, all electric brakes, will run up to 40" diameter beams. |
Cleaned, painted & tested. |
Journal |
54" Rubber |
230V 3 phase |
| COCKER |
TB 53 |
053-48986-S |
|
RECOND |
4½" |
18 5/8" Felt |
220/440 |
| COCKER |
149C-42 |
54537-1-76 |
Warper with oiler |
AS IS |
|
38 3/8" Rubber |
220/440 |
| COCKER |
149C-42 |
54537-1-76 |
Warper with oiler - Cleaned & Checked |
|
|
38 3/8" Rubber |
220/440 |
| COCKER |
149C-42 |
54537-1-76 |
Warper with oiler - Cleaned, checked & rebuilt |
RECOND |
|
38 3/8" Rubber |
220/440 |
| COCKER |
SB-21 |
051-53342-2-71 |
|
AS IS |
4½" |
18 5/16" Phen |
220 |
| COCKER |
SB-21 |
051-53440-1-72 |
|
AS IS |
4½" |
|
|
| COCKER |
SB-21 |
051-53209-1-71 |
|
AS IS |
4½" |
|
|
| COCKER |
SB-21 |
051-5 |
|
AS IS |
4½" |
|
|
| COCKER |
144B-21 |
144B-57 |
Warper for 21" x 21" with oiler, 18 3/8" Press roll with Phenolic and steel bands on edge. Warper is cleaned & tested |
AS IS |
|
18 3/8" Phen |
220/440 |
| COCKER |
144B-21 |
144B-52 |
Warper for 21" x 21" with oiler, 18 3/8" Press roll with Phenolic and steel bands on edge. Oiler & Simco Anti-Static. 100% Reconditioned |
RECOND |
|
18 3/8" Phen |
220/440 |
| COCKER |
Creel |
|
Creel only, 2000 ends, Cocker base plates, H.D. package holder #828344-1, post & disk tension #155224 |
AS IS |
|
|
|
| TEXTIMA |
MODEL 15/4107 |
2503 |
Year: 1982, with inspection table |
RECOND |
70mm |
12¼" Felt |
380 |
| TEXTIMA |
MODEL 15/4107 |
2112 |
Year: 1974 |
RECOND |
70mm |
12¼" Felt |
380 |
| FLETCHER |
MILL WARPER |
|
105" Warper for 70mm beam shafts & 114 mm beam shafts |
|
|
|
220/440 |
| |
|
|
|
|
|
|
|
| SAMPLE WARPERS |
|
|
|
|
|
|
MAYER |
HAND |
|
Hand crank sample warper |
RECOND |
|
|
|
| GIBBS |
|
|
Motorized sample warper |
RECOND |
|
|
|
| D&S |
|
|
Motorized sample warper |
RECOND |
|
|
|
|
